Classic / Technical Specifications
Composition
45% Reclaimed timber
48% Recycled high-density polyethylene (HDPE)
7% UV stabilisers, coupling, colourants and anti-mould agents.
Weight
137mm 4.03kg/m (21.8Kg per 5.4m length)
Span
AS1720.1
450mm (max). Min 2 spans/3 joists.
Load Limitations
AS1720.1
3.0kPa uniformly distributed live load
1.8kN point live load as per AS1170.1
50Kg dead load applied over 2 boards.
(Creep factor 4 adopted)
Water Absorption
ASTM D570-98 (2010)
1 (24 hour immersion)
0.51%
Slip Resistance
1. AS4586:2013 Oil-wet inclining platform method
Result: R11
2. AS4586-2013 Wet pendulum test method
Result: P5
Ekodeck Decking boards are supplied with a certified anti-slip rating as per AS4586:2013. Over time, dependent on traffic, environment and other external factors, the surface may wear. It is the responsibility of the owner to periodically test the boards to ensure anti-slip rating requirements are being met.
Luminance Reflectance Value
Durability: Accelerated Weathering
AS1580 Method 601.1
?E*ab: 1.3 (minor change in colour)
Durability: Hardness
Janka
10.5 (very hard)
Durability: Rot and Decay Resistance
In-ground accelerated field simulator test designed by the University of Melbourne.
Mass loss Ekodeck: 0.23%
Mass loss Radiata Pine: 3.42%
Durability: Termite Resistance
Charpy Unnotched Impact Strength
ASTM D6110-10
80 J/m
C (Complete break)
Screw Withdrawal and Lateral Resistance Characteristics
ASTM D1761
10g 316 stainless steel:
Withdrawal resistance: 106N
Lateral resistance: 1434N
Deflection Temperature Under Load
ASTM D648-07 Method B
105.0°C
Linear Coefficient of Thermal Expansion
ASTM D6341-16
3.83 X 10-5 (cm/cm)/°C
Burning Behaviour
Fire related characteristics
AS/NZS 1530.3-1999
Ignition time: 7.10 min
Flame propagation time: 111.4 sec
Heat release integral: 110.5 kJ/m2
Smoke release, log d: -1.2488
Optical density, d: 0.0613 /metre
Ignitability index: 13
Spread of flame index: 5
Heat evolved index: 4
Smoke developed index: 3
Toxicity (ROHS: Elementary Analysis and flame retardants)
IEC 62321-5:2013, determination of Cadmium by ICP-OES.
IEC 62321-5:2013, determination of Lead by ICP-OES.
IEC 62321-4:2013, determination of Mercury by ICP-OES.
IEC 62321:2008, determination of Hexavalent Chromium by Colorimetric Method using UV-Vis.
IEC 62321-6:2015, determination of PBBs and PBDEs by GC-MS.
Cadmium (Cd): Not detected.
Lead (Pb): 22
Mercury (Hg): Not detected.
Hexavalent Chromium (CrVI): Not detected.
Sum of PBBs: Not detected.
Get started with Ekodeck
Experience our entire colour range for yourself. We deliver a sample kit complete with each colour direct to your door free of charge.